Basic Info.
Application
Energy Metering
Type
Electromagnetic Flow Meter
Applications
Petroleu/Chemical/
Outlet Size
1′′/1 1/2′′/2′′
Material
Aluminum/Cast Iron/Stainless Steel
Connection
BSPT/NPT Thread
Transport Package
International Packaging
Specification
22cm*21cm*18cm
Product Description
Introduction OGM-25/40/50 aluminum oval gear meter has the ability to handle a wide range of fluid viscosities with execptional levels of repeatability and durability .applying in the petroleum,chemical,food industry etc.and it has big advantages as follows. Characteristic 1.low pressure drop2.Compact sixe,easy maintenance3.Easy to read and operate mechanical display4.Horizontally and vertically fiexibility of installation options5.5-digital sub-total,with floating point from 0.01 to 9999.99,7-digital non-resettable totalizer6.3.6V lithium battery power,durable service.Technical SpecificationModel | OGM-25 | OGM-40 | OGM-50 |
Size | 1" | 1.5" | 2" |
Flow Rate | 20-200L/min | 25-250L/min | 30-300L/min |
Accuracy | ±0.5% | ±0.5% | ±0.5% |
Max pressure | 3.4Mpa | 1.8Mpa | 1.8Mpa |
Ports | 1"BSPT | 1.5"BSPT | 2"BSPT |
Register/talizer | 4 Digital/6 Digital |
Unit | Liter/US Gallon/MP Gallon |
OGM pulsed oval gear meter Characteristic Oval gear meter disign low maintenance.low pressure drop.5V DC power supply required. Reading in litres. Technical SpecificationModel | OGM25-DP | OGM40-DP | OGM50-DP |
Size | 1" | 1.5" | 2" |
Flow Rate | 20-200L/min | 25-250L/min | 30-300L/min |
Accuracy | ±0.5% | ±0.5% | ±0.5% |
Max pressure | 3.4Mpa | 1.8Mpa | 1.8Mpa |
Ports | 1"BSPT | 1.5"BSPT | 2"BSPT |
Register/talizer | 4 Digital/6 Digital |
Unit | Liter/US Gallon/MP Gallon |
Button operation instructions 1. Power on: When the START button is turned on, or the sensor has a metering pulse signal, the flow meter automatically shuts down for 1 minute without any operation.2. Single data clear: Press the CLEAR button in the normal display state to clear the single fueling data.3. View total accumulation: Press the TOTAL button for 5 seconds in the normal display state. At this time, the TOTAL word appears on the next line. The total display is the total accumulation after 3 seconds.4. Single cumulative clearing: Press the TOTAL button for 5 seconds in the normal display state, the total cumulative display, press the TOTAL button, the single cumulative flashing, press the CLEAR button to clear the single accumulation.The working principle of the elliptical gear flowmeter 1. The flowmeter is installed at the oil outlet end of the oil pump. If it is installed at the oil inlet, the pressure of the filter is damaged, so that the negative pressure of the oil pump is increased, so that the flow meter is not accurately measured, and the inlet and outlet of the pump also need to be completely sealed. Otherwise, the flow meter will be metered inaccurately.2. Install a filter at the front end of the flowmeter to prevent particles larger than 0.2MM from passing through, in order to prevent the flowmeter from getting stuck or blocked due to the particle surface. The filter should be cleaned frequently.3. The check valve should be equipped with a check valve to prevent the pipe liquid from flowing in one direction, preventing the meter gear from being reversed, or idling to make the flow meter measurement inaccurate.4. The flowmeter should be properly installed. The display screen of the flowmeter should be installed upwards or at 90 degrees, and it should not be installed diagonally.5. The flowmeter should be installed in the same direction as the direction of the liquid shown on the flowmeter housing. The installation position should be convenient for reading.6. The flowmeter pressure loss is proportional to the liquid flow rate, the liquid viscosity increases, and the pressure loss also increases. Error coefficient calibration In the standby state or the current fill amount display state, press the START button for 5 seconds to enter the error coefficient calibration state. The middle row is displayed in front of E- and the last digit is flashing. Press START button, digital shift, (blinking digital shift), press CLEAR button for "plus", press TOTAL button for "minus" to modify the current flashing digit value. . When this coefficient is increased, the amount of oil is reduced, and the smaller the coefficient, the more oil is produced. Standby for 5 seconds to end the error factor calibration. Return to display the current fill amount status. After the error coefficient is calibrated, if there is a new metering pulse input, the new error coefficient is used for calibration. The error coefficient calibration range is 0000-20000. Each time a coefficient is adjusted, the error of the flow meter adding oil is about 0.05% Unit of measure settingIn the standby state or the current fill amount display state, press the START button for 5 seconds. Enter the error coefficient calibration state, press the START button 4 times to enter the unit conversion, the screen displays UN 4, press the CLEAR or TOTAL button, select cubic meters / M3 → US gallons / US → gallons / GA → l / L → kg / KG measurement The unit and the cumulative amount of the added amount are displayed after being converted according to the current unit of measure. Press the START button 2 times or standby for 5 seconds to exit the unit conversion setting.
Address:
guangzhou Conghua district, Suburban street 3-104
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Guangzhou Topforce international trading Co., Ltd, founded in 2008, engaged in fuel dispenser in early stage. To building a modern factory, from 2012, we invested in purchasing a series of mechanical equipment, recruiting professional and experienced talent, and integrating human resources with a whole collection of management, operation and service. We are committed to research and develop, produce and sell fuel dispenser spare parts for fuel nozzles, fuel pumps, fuel flowmeters, fuel swivel and joint, fuel hose, measuring can, Jerry can, LPG dispenser, etc. So that we provide our partners with professional and eficient one-stop service. Welcome to visit our factory and trust us, we surely will be your best partner in fuel equipments.